Still in Guangzhou?
See the actual fabric before you fly home.
Photos and brochures all look the same. Come and put your hands on the roll — check the coating weight, the hand feel, the weld strength, and the certification paperwork. We are 40 minutes from the Canton Fair complex.
Available this week: Nov 1 – Nov 4 · Morning or afternoon slots
Why it is worth the 40 minutes
You check the real spec, not the brochure
Coating weight, base fabric denier, peel strength, tear resistance. Bring your current sample and we will put them side by side under the same light.
Certification paperwork in hand
SGS reports, GB8624 B1, NFPA 701, EN 13501-1 B-s2,d0 and REACH documentation available to review and photograph — the part suppliers rarely bring to a booth.
You talk to the decision maker
Not a booth staffer reading a script. You speak directly with the export manager who prices your order and signs the delivery commitment.
What you can inspect in the showroom
Getting here
Address
Room 308, Building 1, No.1686 Panyu Avenue North
Qiaonan Street, Panyu District, Guangzhou
广州市番禺区番禺大道北1686号朗信国际1栋1座308
From the Canton Fair complex
- By taxi / ride-hailing: roughly 40–50 minutes, about ¥80–110. Show the driver the Chinese address above.
- By metro: Line 8 to Kecun, change to Line 3 to Panyu Square, then a short taxi. Allow 60–70 minutes total.
- We can arrange pickup from your hotel in Tianhe or Haizhu if you confirm one day ahead.
What to bring
- Your current sample or a photo of it — the fastest way to match or beat it
- Target specification: GSM, width, colour, end use
- Your target price and volume, if you already have a number
- Company details if you need a formal quotation or proforma invoice
What you leave with
- Free physical samples of the closest matches
- A written quotation, usually same day
- Copies of relevant certification documents
Book a slot
Pick a time and send it. We confirm by WhatsApp within a few hours. If you are short on time, just message us your hotel and we will come to you instead.
Fastest — usually answered within minutes
Best if you need a formal invitation letter
Weekdays 09:00–20:00 China time
Or leave your details and we will come back to you
A straight answer about Canton Fair Phase 3
Phase 3 (Oct 31 – Nov 4) is the apparel, footwear and medical products phase.
If you are sourcing finished garments, this is your phase, but it is not ours.
We are here for buyers who source the material — coated fabric, tarpaulin,
banner substrate, tent membrane. Many of those buyers finish their fabric meetings in
Phase 2 and then spend the following week visiting factories around Guangzhou.
If that is your plan, this is the week we can actually sit down with you properly,
with samples on the table instead of a queue at a booth.